your snowadventuresSTARThere

Silencer is compatible with SLP Single Pipe, allowing it to be added at a later date. Weight Reduction: 13.5 lb SAE J-2567 Tested Below 88 dB: ✔ Instruction Sheets:
09-324 Learn More

Silencer is compatible with SLP Single Pipe, allowing it to be added at a later date. Weight Reduction: 13.5 lb Horsepower Increase: 2 hp SAE J-2567 Tested Below 88 dB: ✔ Instruction Sheets:


09-324 Learn More

This Pipe Set with SLP Ultra-Lite™ Competition Silencer for the Axys 800 was designed with the competition racer in mind. It provides an additional 9 horsepower and reduces weight by 16.5 pounds of weight savings. Instruction Sheets:
09-803 09-804

Learn More

These trick flapper valves provide 40% more airflow to the engine. They are activated by air box vacuum. As soon as the engine intake needs more air than the stock system can provide the Powder Valves™ open, delivering the required amount of air to the engine. This kit utilizes a Powder Snow Pre-Filter over the Powder Valve™ to keep water and snow out of the intake tract. Instruction Sheets:
14-143 Learn More

Get your horsepower to the ground with SLP Power Shift™ Clutch Kits! Countless hours of field testing go into each kit to ensure maximum horsepower transfer efficiency. Each kit contains the required components which may include: weights, springs, and a helix to make your sled perform at its peak. Learn More

This Pipe Upgrade Kit for a Polaris 800 Ayxs contains the pipe and all of the necessary hardware to upgrade one of our lightweight silencers that you previously purchased/installed to a complete pipe kit. Instruction Sheets:
09-866 09-801 Learn More

for XP, XM & XS E-TEC Models Instruction Sheets:
09-312 09-317 Learn More

for 2015-20 Polaris 800 Axys Models Looking for all-out performance out of your 800 Axys? With an impressive 20.6 gain in horsepower and 9.4 ft/lb increase in torque, this kit is sure to satisfy. Instruction Sheets:
Axys-Stage 4 Learn More

Projected Tip Set Screws (Part #40-158) are 1.8 grams each and can be loaded in the tip of the weight where the projected tip extends deeper into the weight. This allows more mass to be added to the tip of each weight and can be a benefit in certain applications and tuning scenarios. Sold in packs of 3. Cannot be used with weight set #40-154 Learn More