your snowadventuresSTARThere
-
for 2016-22 600 RMK, Pro-RMK, 2017-21 Pro-S, Pro-X, XCR, Switchback, 2020 Indy XC, SP(Axys Chassis)
This silencer adds an
additional 2 horsepower and
reduces weight by 13.5 pounds.
Weight Reduction: 11.5 lb
SAE J-2567 Tested Below 88 dB: ✔
Instruction Sheets:
09-319 Learn More
-
This item is a factory second.
Less weight, proven horsepower and the SLP signature performance sound, just the right recipe for your 2012 600 RMK.
Weight Reduction: 3.25 lb
SAE J-2567 Tested Below 88 dB: ✔
See the link below for the Ultrablack High Temp Silicone Sealer necessary for proper installation.
Learn More
-
These O-Rings are for Polaris XLT/XCR 580/600 models with SLP Billet Heads. Sold per each.
Learn More
-
One of the most critical parts in your fueling system is the injector. Over time with normal use, your fuel injector can develop deposits that prevent them from metering fuel correctly. These deposits can cause inconsistencies in performance, poor fuel economy and runability problems with your sled. Our fuel injector cleaning service will remove the deposits and as an added benefit we will check the flow rate to ensure that it operates within its normal flow range.
Both injectors must be sent for testing. ALL o-rings must be replaced. Learn More
-
Raising your ProTaper bars on a Polaris sled used to be a challenge – until now. These kits include the riser block and replacement bolts which work with the stock one piece top clamp.
Note: The maximum height you can raise your bars without having to extend your cables will vary depending on which height ProTaper bars you have. Verify cable free-play length before purchasing riser.
Learn More
-
These high-performance rollers provide increased roller life. Manufactured from Torlon®, these rollers are extremely tough by design.
Sold per each.
Also works with Polaris TSS-21 models.
Learn More
-
These springs offer more variety of pre-load and final rates than stock, providing adjustments for better backshift and less sensitivity to changes in elevation and snow conditions. Inquire for a recommendation specific to your combination, riding style and elevation. Sold per each.
Learn More
-
This silencer reduces weight by 14.8 pounds. It features ERA 2014 Silencing Technology which has been SLP tested and passed SAE J-2567 stationary sound test below 88 decibels.
Weight Reduction: 14.8 lbs
SAE J-2567 Tested Below 88 dB: ✔
This silencer is Not compatible with SLP Single Pipe.
NO ECU Modification is required.
Instruction Sheets:
09-323 Learn More
-
-
This simple washer provides a super slick surface to help eliminate spring binding as the clutch goes through its range of motion.
Instruction Sheets:
50-57
50-142
50-143 Learn More