your snowadventuresSTARThere
-
Reduces weight by 4 pounds and delivers an additional 2-3 horsepower.
Learn More
-
These O-Rings are for Polaris XLT/XCR 580/600 models with SLP Billet Heads. Sold per each.
Learn More
-
Raising your ProTaper bars on a Polaris sled used to be a challenge – until now. These kits include the riser block and replacement bolts which work with the stock one piece top clamp.
Note: The maximum height you can raise your bars without having to extend your cables will vary depending on which height ProTaper bars you have. Verify cable free-play length before purchasing riser.
Learn More
-
These high-performance rollers provide increased roller life. Manufactured from Torlon®, these rollers are extremely tough by design.
Sold per each.
Also works with Polaris TSS-21 models.
Learn More
-
This silencer reduces weight by 14.8 pounds. It features ERA 2014 Silencing Technology which has been SLP tested and passed SAE J-2567 stationary sound test below 88 decibels.
Weight Reduction: 14.8 lbs
SAE J-2567 Tested Below 88 dB: ✔
This silencer is Not compatible with SLP Single Pipe.
NO ECU Modification is required.
Instruction Sheets:
09-323 Learn More
-
Inner Replacement Roller for TEAM Tied Secondary Clutch (2 required per clutch).
NOT for Arctic Cat BOSS or Polaris TSS-21 Clutches. For Arctic Cat Boss or Polaris TSS-21 Clutches use part #50-145.
Learn More
-
This simple washer provides a super slick surface to help eliminate spring binding as the clutch goes through its range of motion.
Instruction Sheets:
50-57
50-142
50-143 Learn More
-
These helixes are for the 2021-24 Yamaha Mountain Max with BOSS secondary clutch.
Learn More
-
Made to maximize the TEAM Rapid Response clutch’s performance potential, these kits include our groundbreaking Magnum Force™ weights and SLP drive clutch spring for ultimate acceleration and horsepower transfer efficiency. Weights are adjustable with set screws and supplied T-handle wrench for quick and easy fine tuning. Depending on the combination, some models also include the helix and/or driven clutch spring.
Learn More
-
For 2024 XTerrain RE and 2023-24 Shredder DS (Naturally Aspirated)
This Ultra-Lite™ silencer for the Lynx 850 Xterrain RE and Shredder DS was designed with the competition racer in mind. It provides up to 9.1 pounds of weight savings. It passes the stationary sound test below 88 decibels but gives a more exciting sound at the higher RPM ranges (several decibels louder than our quiet version at wide open throttle). Throttle response is also improved slightly over our quiet silencer.
Instruction Sheets:
09-345 Learn More
