Ski-Doo

This Pipe Upgrade Kit contains the pipe, y-pipe and all of the necessary hardware to upgrade one of our lightweight silencers that you previously purchased/installed to a complete pipe kit.   HINT: For easier y-pipe installation on 800 models we recommend the use of 6mm x 5” long 3/8” drive ball end allen (part# 20-221). For G4/G5 models we recommend using 6mm x 2"long drive ball end (Part #20-241). Instruction Sheets:
090-867P 090-807P Learn More

This Pipe Upgrade Kit contains the pipe, y-pipe and all of the necessary hardware to upgrade one of our lightweight silencers that you previously purchased/installed to a complete pipe kit.   HINT: For easier y-pipe installation we recommend using 6mm x 2"long drive ball end (Part #20-241). Instruction Sheets:
090-867P 090-807P Learn More

Raising your ProTaper bars on a Polaris sled used to be a challenge – until now. These kits include the riser block and replacement bolts which work with the stock one piece top clamp. Note: The maximum height you can raise your bars without having to extend your cables will vary depending on which height ProTaper bars you have. Verify cable free-play length before purchasing riser. Learn More

Inner Replacement Roller for TEAM Tied Secondary Clutch (Sold per each, 2 required per clutch). NOT for Arctic Cat BOSS or Polaris TSS-21 Clutches. For Arctic Cat Boss or Polaris TSS-21 Clutches use part #50-145. Learn More

These billet steel ramps are lighter than stock and are matched in weight with a similar shift angle to Ski-Doo 415 ramps. Recommended with most of our pipe kits for the Ski-Doo 800 H.O. and XP/XM models. Sold per set of 3. Learn More

Replaces worn Clutch Weight Bushings to maintain the best performance. Reduce weight and roller wear due to worn bushings. Learn More

These aluminum brackets replace the stock plastic ice scratcher brackets for a stronger, more durable storage solution when the ice scratchers are not in use. Sold per pair. Learn More

This remarkable patented material reduces heat and friction for better high speed, hard-packed use, or on paddle tracks without melting. Improved fuel economy and slide rail life. Sold per pair.LIMITED TO STOCK ON HAND!     *Note: For models that have closed window tracks you must use anti-wear pads.  If track has all the windows open yet crossbars are not clipped, clips will need to be added. Learn More

Tired of breaking Ice Scratchers every time you back up? These Ice Scratchers are designed to function in reverse without any damage. They will also apply a lot of force to the ground while you ride to maximize snow on the track. The Bi-Directional Ice Scratcher 2.0 kit is faster to install and continues to deliver the very best in durability and performance. Learn More