Ski-Doo
-
Runners for SLP Straight Line Tracking (SLT)™, Powder Pro™, MoHawk Skis™
SLP runners are manufactured from high strength steel with hardweld surface leading into the carbide and also on the trailing edge for excellent durability. They are made to precise dimensions for a direct match with your SLP skis. Sold per pair
Learn More
-
for Powder Pro II™, SLT II™, Tri-Keel™ and MoHawk Skis™, Sold per each (2 required to complete a set of skis)
Learn More
-
Get rid of the hot air that's trapped inside your engine compartment with this Hot Air Elimination™ Kit. This kit increases the air inlet as well as the outlet areas to efficiently provide the necessary air flow through the engine compartment. Sold per side in kit form, each vent can be purchased separately if desired.
Instruction Sheets:
32-614
32-615
After printing template, make sure template matches the size of the vent.
Learn More
-
Get rid of the hot air that's trapped inside your engine compartment with this Hot Air Elimination™ Kit. These kits decreases underhood temperatures by 30%. They increases the air inlet as well as the outlet areas to efficiently provide the necessary air flow through the engine compartment. Sold per side in kit form, each vent can be purchased separately if desired.
Learn More
-
Get your horsepower to the ground with SLP Power Shift™ Clutch Kits! Countless hours of field testing go into each kit to ensure maximum horsepower transfer efficiency. Each kit contains the required components which may include: weights, springs, and a helix to make your sled perform at its peak.
Learn More
-
-
Replacement straps for SLP Ski-Slips are sold per pair of 2 with mounting hardware.
24" Straps are designed for use on 2015-25 Ski-Doo Summit, Freeride and Backcountry (with Pilot DS 2 and DS 3 Ski) and Lynx DS/XC Ski.
Learn More
-
Spring compression rated in pounds at (74mm and 42mm).
Learn More
-
Adjust the gram weight of your Ski-Doo & Lynx P-Drive drive clutch shift weight, or “pivot”, with this Adjustable Pivot Kit. This kit allows adjustment from 13.1 grams to 25.85 grams.
Learn More
-
Put the horsepower to the ground with these new Magnum Force weights for Ski-Doo & Lynx P-Drive models. These weights pinch the belt significantly more than the stock weights, resulting in more horsepower transferred to the ground. This additional pinch force also reduces the amount of belt slippage, especially noticeable at low speed ranges where there is little contact surface area between the clutch and the belt. The difference is so significant that a firm grip on the bars is required. Adjustable by adding mass via set screws without removing weights from the clutch. Sold per set.
The Ski-Doo & Lynx Magnum Force™ weights utilize a poly bushing with side thrust surface area to further eliminate friction and wear on the clutch.
Instruction Sheets:
40-155
40-161 Learn More
