All products

Power Dome™ Billet Heads for 2015-20 Polaris 800 Axys Models SLP Power Dome™ Billet Heads for the Polaris 800 substantially improve combustion efficiency without radically increasing compression, delivering an additional 4.2 horsepower peak and up to 5.2 horsepower midrange. Instruction Sheets:
Head Instructions Learn More

Silencer is compatible with SLP Single Pipe, allowing it to be added at a later date. Weight Reduction: 13.5 lb SAE J-2567 Tested Below 88 dB: ✔ Instruction Sheets:
09-324 Learn More

Silencer is compatible with SLP Single Pipe, allowing it to be added at a later date. Weight Reduction: 13.5 lb Horsepower Increase: 2 hp SAE J-2567 Tested Below 88 dB: ✔ Instruction Sheets:


09-324 Learn More

This Pipe Set with SLP Ultra-Lite™ Competition Silencer for the Axys 800 was designed with the competition racer in mind. It provides an additional 9 horsepower and reduces weight by 16.5 pounds of weight savings. Instruction Sheets:
09-803 09-804

Learn More

This Pipe Upgrade Kit for a Polaris 800 Ayxs contains the pipe and all of the necessary hardware to upgrade one of our lightweight silencers that you previously purchased/installed to a complete pipe kit. Instruction Sheets:
09-866 09-801 Learn More

for Polaris RMK Pro-Ride and RMK Axys Instructions: 32-357 32-359 Learn More

Get everything you need to upgrade your higher temp thermostat to the new style lower temp (110° F) thermostat found on the 2018 and newer models for improved consistency and performance. This upgrade kit is intended for use with an SLP Power Dome Head. If you already have the SLP head set, purchase of the head skull (Part #12-422) will be required to use the SLP domes with the 2018 upgrade kit. If you don’t have the SLP head set, purchase the appropriate 2018 SLP Power Dome Head set and then use this upgrade kit for the conversion. Upgrade kit includes a new head cover, thermostat, seal, o-rings and all necessary hardware. Learn More

SLP has done it again! Providing more horsepower through combustion chamber design, these billet heads for the Polaris Patriot 850 engine deliver an impressive 6 horsepower peak with an additional 5 to 7 midrange. They are designed to maintain compatibility with 91 octane pump fuel for optimal reliability and consistency. Currently available for use with stock engine/pipe configuration as well as an SLP lightweight silencer and an SLP intake kit (SLP Stage 1.5, which provides a total of 7.8 horsepower peak) with no fuel management changes required. for 2019-27 Polaris 850 Axys and Matryx Models Learn More

Get the necessary specialty tools required to remove and service your Polaris P-85 drive and Polaris/TEAM driven clutches with this complete tool kit. For Polaris 1999-00 XCR 7/800, 2000-27 5/6/650/7/8/850/900 Twins and FST except Boost and 9R.

Click here for P-22 Master Service Kit. Learn More