Polaris

This precision manufactured tool allows you to easily replace weight bushings without damaging the weight or bushing. This tool works to replace worn bushings on Arctic Cat, Polaris or SLP MTX™ Weights. Part #20-216 fit models using #40-200 bushings. These bushing are used on the following models: Arctic Cat: MTX™ or OEM Weight on 9 Tower or Rapid Response Clutches. Polaris: P-85 Clutches, Magnum Force™, MTX or OEM Weights. Part #20-249 is for Magnum Force Weights™ on Boost or 9R models with the P-22 Clutch. Learn More

Moveable Sheave Bushing for TSS-04 and TSS-21 Driven Clutches. Learn More

Raising your ProTaper bars on a Polaris sled used to be a challenge – until now. These kits include the riser block and replacement bolts which work with the stock one piece top clamp. Note: The maximum height you can raise your bars without having to extend your cables will vary depending on which height ProTaper bars you have. Verify cable free-play length before purchasing riser. Learn More

These O-Rings are for Polaris XLT/XCR 580/600 models with SLP Billet Heads. Sold per each. Learn More

One of the most critical parts in your fueling system is the injector. Over time with normal use, your fuel injector can develop deposits that prevent them from metering fuel correctly. These deposits can cause inconsistencies in performance, poor fuel economy and runability problems with your sled. Our fuel injector cleaning service will remove the deposits and as an added benefit we will check the flow rate to ensure that it operates within its normal flow range. Both injectors must be sent for testing. ALL o-rings must be replaced. Learn More

For SLP Exhaust Systems Part #090-49 is used to attach the Trail Chef Cooker to the cooker mount on SLP PicNic'R Silencers. Learn More

Seals that are exact replacements for stock or SLP high performance exhaust systems. Sold per each. Learn More

Less weight, proven horsepower and the SLP signature performance sound, just the right recipe for your 2012 600 RMK. Weight Reduction: 3.25 lb SAE J-2567 Tested Below 88 dB: ✔ See the link below for the Ultrablack High Temp Silicone Sealer necessary for proper installation. Learn More

Reduces weight by 4 pounds and delivers an additional 2-3 horsepower. Learn More