-
Spring compression rated in pounds at ( 74mm / 42mm )
Learn More
-
Secondary springs control shift rate. These springs allow you to fine tune your Ski-Doo QRS secondary clutch with these springs manufactured to the most precise specifications.
Learn More
-
Designed specifically with angles to match our Stage 1 and 2 Kits for the Ski-Doo/Lynx 850, these helixes offer improved acceleration and more consistent peak RPM.
Learn More
-
Magnum Force Ultra™ Clutch Weights with AST Technology™ for Ski-Doo Turbo (US Patent #11739836 and Patents Pending)
Instruction Sheets:
40-167 Learn More
-
Put the horsepower to the ground with these new Magnum Force weights for Ski-Doo & Lynx P-Drive models. These weights pinch the belt significantly more than the stock weights, resulting in more horsepower transferred to the ground. This additional pinch force also reduces the amount of belt slippage, especially noticeable at low speed ranges where there is little contact surface area between the clutch and the belt. The difference is so significant that a firm grip on the bars is required. Adjustable by adding mass via set screws without removing weights from the clutch. Sold per set.
The Ski-Doo & Lynx Magnum Force™ weights utilize a poly bushing with side thrust surface area to further eliminate friction and wear on the clutch.
Instruction Sheets:
40-155
40-161 Learn More
-
Adjust the gram weight of your Ski-Doo & Lynx P-Drive drive clutch shift weight, or “pivot”, with this Adjustable Pivot Kit. This kit allows adjustment from 13.1 grams to 25.85 grams.
Learn More
-
Spring compression rated in pounds at (74mm and 42mm).
Learn More
-
Get your horsepower to the ground with SLP Power Shift™ Clutch Kits! Countless hours of field testing go into each kit to ensure maximum horsepower transfer efficiency. Each kit contains the required components which may include: weights, springs, and a helix to make your sled perform at its peak.
Learn More
-
Inner Replacement Roller for TEAM Tied Secondary Clutch (2 required per clutch).
NOT for Arctic Cat BOSS or Polaris TSS-21 Clutches. For Arctic Cat Boss or Polaris TSS-21 Clutches use part #50-145.
Learn More
-