These springs work with the Arctic Cat Clutch and Polaris Snowmobile Drive Clutches (inlcuding Arctic Cat Adapt and Polaris P-22 clutches). These springs are made of the highest quality materials. Chrome silicone shot peened. Learn More

for Rapid ReactionTM TSS-21 (Large Roller) Driven Clutches These helixes are for TSS-21 Rapid ReactionTM Secondary Clutches found on 2021 and newer Polaris models with large rollers. They are designated with a .36 which are multi-angle with the first angle being 0.36 inches long. Learn More

or Up to 2006 Polaris 1” Keyed Shaft Models This TSS-04 TEAM® Clutch is a direct replacement of the OEM Secondary Clutch found on 2003-06 keyed TSS-98 Secondary Clutch found on many Polaris snowmobiles Sold as a clutch assembly without spring or helix. Learn More

The Magnum Force™ weight is the latest clutching technology, improving the clamping efficiency of the weight (especially at low to mid speed ranges). It utilizes external adjustability by means of a gun drilled and threaded center core, where mass can be added or subtracted without removing the weight from the clutch. Instruction Sheets:
40-150 40-151 40-154 40-164 Learn More

Projected Tip Set Screws (Part #40-158) are 1.8 grams each and can be loaded in the tip of the weight where the projected tip extends deeper into the weight. This allows more mass to be added to the tip of each weight and can be a benefit in certain applications and tuning scenarios. Sold in packs of 3. Cannot be used with weight set #40-154 Learn More

Drive clutch belt-to-sheave clearance is extremely important. It should be set at a maximum of .020" with a new belt. Too much belt-to-sheave clearance will cause poor clutch performance. This shim kit allows you to adjust your belt-to-sheave clearance for optimum clutch performance. Kit includes 3 - .020" shims and 2 - .030" shims. Learn More

Inner Replacement Roller for TEAM Tied Secondary Clutch (Sold per each, 2 required per clutch). NOT for Arctic Cat BOSS or Polaris TSS-21 Clutches. For Arctic Cat Boss or Polaris TSS-21 Clutches use part #50-145. Learn More

For Polaris SLP Clutch Kits include only parts you need for maximum performance. In some cases OEM parts are retained if they are the best choice. If your sled is used in extreme conditions, modified other than as specified, rider weight exceeds 220 lbs., or with a heavily studded track, a custom combination may apply. SLP technical service representatives can provide advice for these special applications Learn More

for Arctic Cat and Polaris Snowmobiles Instruction Sheets:
Arctic Cat 6 Tower Cutch Arctic Cat 9 Tower Cutch Arctic Cat with Rapid Response Polaris Learn More