your snowadventuresSTARThere

This package features a SLP Single Pipe Set that reduces weight by 13 lbs. (14.5 lbs on RMK, RMK Assault and SKS models). It also provides an additional 9 horsepower increase and is 6.5 lengths faster in 3/10ths mile drag race, +5 mph faster top speed. For optimum performance it also includes a SLP Power Shift™ Clutch Kit. No fueling changes required. Instruction Sheets:
Axys-Stage 2 Learn More

This package features a SLP Single Pipe Set and SLP Power Dome™ Billet Heads and an SLP Reflash Box (for elevations below 5000’ only). This kit reduces weight by 13 lbs. (14.5 lbs on RMK, RMK Assault and SKS models) and provides an additional 12.4 horsepower increase over stock. For optimum performance it also includes a SLP Power Shift™ Clutch Kit. No fueling changes required above 5000’. If running 0-5000' you must run an SLP Reflash Tuner Part #70-800. Instruction Sheets:
Axys-Stage 3 Learn More

NOTE: Due to the manner the ignition wires attach to the coil on Ski-Doo and Yamaha models, it's very difficult to properly replace the wires. On these models we recommend replacing the plug caps only. *Each universal fit wire is 17 inches long and can be cut to fit. For longer lengths, please inquire. Instruction Sheets:
37-18 37-20 37-23 Universal Learn More

These SLP Power Dome billet heads provide an additional 3 horsepower peak with a much more responsive midrange. They feature interchangeable chambers (Domes) for use in low or high altitudes, and utilize the stock water cover for stock appearance. 
These heads require the use of a DynoJet PCV or PCFC fuel controller with SLP’s pre-programmed Stage 3 kit map. Any other combination of parts will require different fuel mapping in the PCV or PCFC, and the customer will be personally responsible to create their own fuel map. Instruction Sheets:
Head Instructions Learn More

Pink Exhaust Valve Spring - Load: 4.7 lbs @ 1" and 7.1 lbs @ .63"
-Recommended on 2008-10 Polaris 800 CFI models at elevations above 5000'.

Yellow Exhaust Valve Spring - Load: 2.4 lbs @ 1" and 3.6 lbs @ .63"
-Recommended on 2001-05 Polaris 700 and 2002-05 800 Edge/RMK models at elevations above 6000'.

White Exhaust Valve Spring - Load: 1.6 lbs @ 1" and 2.8 lbs @.63" Sold per each. 2 springs required per motor.  Learn More

Required for eliminating oil injection: Crankcase Plate bolts in place of the oil pump. Learn More

Eliminate exhaust leaks with these high tech gaskets. Metal gaskets incorporate spring seal technology to eliminate performance robbing exhaust leaks.

**Two gaskets required per engine for part numbers 090-23 & 090-25 Learn More

550 Models: 2014-24 550 Indy 600 Models: 2010-14 600 Rush, 2012-14 600 Switchback, 2014-16 600 Switchback Assault, 2012-16 600 RMK (except Axys), 2013-19 600 Indy. 800 Models: 2011-14 800 Rush, 2012-14 800 Switchback, 2011-16 800 Switchback Assault, 2011-15 800 RMK Assault, 2011-16 800 RMK (except Axys), 2014-16 800 Indy Instruction Sheets:
14-307 Learn More

for 2000-05 Edge, 2006-09 600 HO, 2007-12 600/700 Cleanfire IQ and 2008-10 800 HO Instruction Sheets:
14-107 14-115 14-123 Learn More