your snowadventuresSTARThere

SLP Hot Air Elimination™ Kits help reduce stagnant underhood hot air to maintain higher horsepower by delivering additional cold air intake and hot air escape from the chassis. The kit for the left side helps to keep the clutches running cool, which considerably reduces the chance for performance loss due to heat saturation and improves belt life. Learn More

This innovative (Patent Pending) running board add-on provides plenty of space for snow and ice to fall through, while providing exceptional boot traction too. The Snow Eliminator also acts as a "Frame Doubler" to help strengthen a weak area on some snowmobile models. Once you ride with them you will never want to ride without them. This is a special order item. Allow 2 weeks for delivery. Learn More

These traction pads have a volcano shaped grip surface and have been developed specifically for the Arctic Cat ProCross and ProClimb Chassis. Offered in two separate kits, one for the tunnel sides and another for the console area. These locations were targeted to aid in gripping the sled with the inside of your legs. Sold per kit. Learn More

These trick seat covers incorporate a side panel traction strip for ultimate control in most riding positions. The STOMPGRIP™ Traction Strip is made of a pliable elastomer material molded into shape with traction knobbies to provide a functional, non-abrasive grip to the side of your seat. Learn More

Provides the additional length needed for track clearance when using a longer track. Natural aluminum finish. Learn More

See application chart in the full description below. Ski-Doo 12 spline shaft require the installation of Aluminum Assembly Sleeve see related items. Learn More

for TEAM Industries Rapid Reaction™ Driven Clutch Learn More

The TEAM Tied Driven Clutch for the 2012-15 Arctic Cat with splined shaft takes its own unique helixes. Driven springs are the same as used on other TEAM clutches. Learn More

These helixes are for TSS-98 Rapid Reaction™ Secondary Clutches. Helixes designated with an S are straight angle and those with a .33, or .36 or .46 are multi-angle with the first angle being 0.330, 0.360 or 0.460 long. Don't see the angle you are looking for? We can have helixes cut to whatever angle you are looking for at no additional cost. Please contact SLP at (208)529-0244. Allow 3-5 weeks for delivery on special cut helixes. Learn More