contact us today! 1-208-529-0244

Snow

your snowadventuresSTARThere

Set Ascending Direction

61-70 of 380

  1. Comp. Series Silencer for Ski-Doo 600 G4/G5 Models

    Comp. Series Silencer for Ski-Doo 600 G4/G5 Models

    This Ultra-Lite™ silencer for the 600 G4/G5 models was designed with the competition racer in mind. It provides 9.1 pounds of weight savings. It passes the stationary sound test below 88 decibels but gives a more exciting sound at the higher RPM ranges (several decibels louder than our quiet version at wide open throttle). Throttle response is also improved slightly over our quiet silencer. Available in and Polished Ceramic. Instruction Sheets:
    09-326 09-342 09-345 Learn More
    Starting At :

    $359.95

    View Details

  2. Heavy Duty Flywheel Puller - Ski-Doo 600/850 G4/G5

    Heavy Duty Flywheel Puller - Ski-Doo 600/850 G4/G5

    Having the right tool for the job makes all the difference! Pull your E-TEC flywheel with confidence using this heavy duty purpose-built puller from SLP. Whether you are a service tech or have a personal shop, this puller is built tough to last for years. Includes the required hardware for proper use. Instruction Sheets:
    015-20254.pdf Learn More
    $119.95

  3. SLP Master Clutch Service Kit for Polaris Snowmobile

    P-85 Master Clutch Service Kit for Polaris Snowmobile

    Get the necessary specialty tools required to remove and service your Polaris P-85 drive and Polaris/TEAM driven clutches with this complete tool kit. For Polaris 1999-00 XCR 7/800, 2000-27 5/6/650/7/8/850/900 Twins and FST except Boost and 9R.

    Click here for P-22 Master Service Kit. Learn More
    $692.50

  4. Lightweight Silencer for 2021-22 Polaris 650 Matryx

    Lightweight Silencer for 2021-27 Polaris 650 Matryx

    For 2021-27 650 Switchback Assault, VR1, Indy XC, 2022-27 650 RMK (Matryx) Weight Reduction: 7.7lb Horsepower Increase: 2 hp SAE J-2567 Tested Below 88 dB: ✔ Instruction Sheets:
    09-333 Learn More
    Starting At :

    $349.95

    View Details

  5. Drive Clutch Holding Tool

    Drive Clutch Holding Tool

    Clutch Holding tool for Polaris, Arctic Cat, and Yamaha Snowmobile: Not for use on P-22 Drive Clutch. UTV: Not for use with RZR Turbo/S/4, RS1, Pro XP, 2018-27 XP 1000 Ranger, 2019-27 XP 1000 Ranger Crew, 2024-26 RZR XP 1000 and Xpedition Drive Clutches. For the above models see Part #20-310 or Part# 20-330 Learn More
    $59.95

  6. Clutch Compression Tool for Polaris P-22

    Clutch Compression Tool for Polaris UTV with P90X Drive Cltuch

    This compression tool allows you to compress the spring without removing the clutch from the engine. Simply remove the drive clutch bolt, thread this tool into the center of the clutch and compress the spring. This allows you to safely remove the clutch cover cap bolts without damaging the bushing to change the drive clutch spring or weights. Designed specifically for P90-X drive clutches, but will also work on most Polaris drive clutches. Models with P90-X drive clutch include: All RZR Turbo, Pro XP, 2021 RZR Turbo/4/S/S-4, RZR Pro-R, 2018-27 Ranger XP 1000, 2019-27 Ranger Crew XP 1000, 2022-24 Turbo R and Turbo R-4, 2024-26 XP 1000 RZR and Xpedition. Learn More
    $69.95

  7. Clutch Holding Tool for Polaris including P-22

    Clutch Holding Tool for Polaris (Including P-22)

    This tool holds the primary clutch without the chance of damage when torquing the center bolt or pulling the clutch off with a clutch puller. Made of high-quality aluminum for strength and covered with a special polymer in the clutch contact area to provide traction and eliminate the chance of damage to the clutch, this tool is a must for clutch service. Learn More
    $59.95

  8. Stage 1: for 2023-25 Polaris 9R Matryx

    Stage 1: for 2023-26 Polaris 9R Matryx

    This Stage 1 kit for the 9R is truly an all-around performer. It utilizes our Lightweight Silencer that sheds 7.7 pounds while delivering 2 horsepower peak with improved throttle response. This is combined with the SLP Power Shift™ Clutch Kit that uses the all new SLP Magnum Force™ Weight set designed specifically for the 9R/P22 clutch combination. This Magnum Force™ Weight set harnesses the fantastic power of the 9R delivering ultimate throttle response and overall power. This results in a consistent running sled that is nothing short of FUN! Learn More
    Starting At :

    $694.84

    View Details

  9. Stage 4: for Polaris 850 Models

    Stage 4: for Polaris 850 Models

    How would we describe the 850 stage 4 kit? Pull-the-rope-and-go performance perfection... For starters, we add the patents pending SLP Single Pipe Set to build some serious power and drop 9.6 pounds of unnecessary weight. Next, the torque monster Power Dome™ Head Set creates massive mid-range gains with top-end improvements too. Topping off the horsepower, we include the Performance Edition Porting on your cylinders for a total gain of 16.5 hp peak and 8 hp midrange. Like an orchestra conductor waving his baton to make sweet music, the Flash Tun’R™ with SLP mapping makes sure all kit components are tuned to work in perfect harmony with each other. Lastly, the included Power Shift Clutch Kit™ gets all that extra power from the engine to the track. If you are looking for the ultimate match of performance and consistency, you just found it. Learn More
    Starting At :

    $2,453.08

    View Details

  10. Polaris 650 Matryx Power Dome™ Billet Heads

    Polaris 650 Matryx Power Dome™ Billet Heads

    These heads bump the performance of the 650 to a whole new level utilizing our latest combustion chamber design coupled with a higher compression ratio. This results in snappy throttle response with great top end pull. 91 octane fuel required. Learn More
    Starting At :

    $499.95

    View Details

Set Ascending Direction

61-70 of 380

Sign Up For Our Newsletter! sign up here

2021 All Rights Reserved. Starting Line Products, Inc.